An independent plumbing guide for Dallas and North Texas homeowners. Not a plumbing company.Dallas and 25 nearby towns
214WaterDallas plumbing guide Call (855) 321-2979

Home / Plumbing problems / Tankless water heater repair

Water heaters · Dallas and North Texas

Tankless Water Heater Repair

A tankless unit heats water as it flows through. When it misbehaves, the cause is usually flow, gas or power supply, venting, or mineral buildup inside the heat exchanger.

Last reviewed November 18, 2026

Short answerWrite down the error code on the display before you reset anything. The code and the model number tell the plumber what to bring.

How tankless heaters are rated

ENERGY STAR explains that tankless models are rated by how many gallons of hot water they can deliver per minute, and that the output depends partly on the temperature of the incoming water (ENERGY STAR). Running a shower, the dishwasher and a washing machine at the same time can ask for more than the unit can heat, which shows up as lukewarm water rather than a fault.

Common problems

  • Error codes for ignition or flame failure: often a gas supply, venting or igniter issue on gas units.
  • Hot water that cuts out at low flow: some units need a minimum flow before they fire. A clogged inlet screen or a dirty aerator can push flow below it.
  • Scale in the heat exchanger: minerals left behind by hard water build up over time and cut efficiency. Many manufacturers call for periodic descaling.
  • A wait for hot water: water left in the line between the heater and the faucet cools down and has to run out first, and longer runs mean longer waits (ENERGY STAR).

Before the visit

  • Note the brand, model and the code shown.
  • Check whether other gas appliances are working, which rules out a gas supply problem.
  • For electric tankless units, check the breakers.

Guides for your area: Dallas and 25 nearby towns.

Call (855) 321-2979